Free DIY Furniture Plans to Build a Pottery Barn Inspired Ellsworth Entertaining Cabinet
Feb 27, 2013 5:43am
Designs by Studio C
Ellsworth Entertaining Cabinet
Free DIY Furniture Plans to Build a PotteryBarn Inspired Ellsworth Entertaining Cabinet! This piece has great lines and will satisfy the antique or vintage lovers of you, out there! A Modern build for the furniture lovers of a bygone era!
Saw – Jig, Circular, or Miter
Countersink Bit for Drill
2 – sheets of ” plywood
One quarter sheet of ” plywood
1-1/4” pocket hole screws
1-1/4” brad nails
Edge banding for exposed edges of plywood
2 sets of hinges
2 cabinet pulls
2 – ” plywood at 22-1/2” x 42” – Sides
1 – ” plywood at 42” x 46-1/2” – Back
2 – ” plywood at 21” x 46-1/2” – Bottom & Shelf
2 – ” plywood at 2-1/2” 27-1/4” – Front Frame
1 – ” plywood at 1-1/2” x 41-1/2” – Front Frame
1 – ” plywood at 2-1/2” x 41-1/2” – Front Frame
1 – ” plywood at 21-3/4” x 46-1/2” – Top
1 – ” plywood at 4-1/2” x 48” – Front Apron
1 – ” plywood at 5-1/2” x 46-1/2” – Upper Shelf
4 – ” plywood at 2-1/2” x 15-9/16” – Door Frame
4 – ” plywood at 2-1/2” x 21” – Door Frame
2 – ” plywood at 15-9/16” x 16” – Door Panels
Before beginning to build, always check in on my site to make sure you have the most up to date set of plans, I occasionally update and change the plans to make the building process easier or to allow for less expensive purchasing of materials! Read through the entire set of instructions and all comments before beginning this project. If you print out or save plans, be sure to check in on my site to be sure you have the most up to date set of plans, as I occasionally update things for ease of building or buying. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. If you are unfamiliar with the finishing process, visit my Finishing school for some tips and tricks for painting like a pro and for special finishing practices. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found in the menu of my site.
If using edge banding, it will be applied to the exposed edges of the plywood before assembly.
Cut the pieces for the sides. Maintaining the dimensions shown, cut the curves using a jigsaw.
Cut the piece for the back. Cut the curve in the bottom as shown. Set the Kreg jig for ” material and drill pocket holes as shown. Attach to the sides using glue and 1-1/4” pocket hole screws.
Cut the pieces for the shelf and the bottom. Drill pocket holes along the two shorter edges and one long edge. Secure in the cabinet as shown using glue and 1-1/4” pocket hole screws. The shelf and bottom will be positioned ” back from the front edge of the sides.
Cut the pieces for the front frame. Drill pocket holes in each end of the horizontal pieces. Assemble using glue and 1-1/4” pocket hole screws. Attach to the front of the cabinet using glue and 1-1/4” brad nails.
Cut the piece for the top. Drill pocket holes along the two shorter edges and one long edge. Secure in the cabinet as shown using glue and 1-1/4” pocket hole screws. Secure the top to the top of the frame using 1-1/4” brad nails.
Cut the piece for the front apron. Secure in place using glue and 1-1/4” brad nails.
Cut the piece for the upper shelf. Drill pocket holes along the two shorter edges and one long edge. Secure in the cabinet as shown using glue and 1-1/4” pocket hole screws.
Cut the pieces for the doors. Drill pocket holes in each end of the shorter frame pieces. Set the Kreg jig for ” material and drill pocket holes in all four edges of the panels. Attach the shorter frame pieces to the panels using glue and 1-1/4” pocket hole screws making sure the back of the panel is flush with the back of the frame pieces. Attach the side frame pieces using glue and 1-1/4”pocket hole screws. Attach the hinges to the doors, then install in the cabinet. There will be a 1/8” gap around all sides of the door as well as in between the two. Install the cabinet pulls.
Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School
**Disclaimer: Some rights reserved. Private use only. Feel Free to link to any of my plans so long as you provide an adequate link back to the appropriate post! Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it.
Read more on The Design Confidential >